Firstly, check the status of the electrical installation whether or not there is power supply. You have to make sure that the oven is connected.

                                       
Cause : Oven just installed or interruption in the power supply, with the function selector not in position “0”.
Solution: Set the clock to the right time and the oven will start.

                                       
Cause: The time pre-set for cooking has elapsed.
Solution: Turn the function selector and the temperature selector to the “0” position.

                                       
Cause: Oven blocked with the function selector in position “0”.
Solution: Release the timer as indicated in the “Child Safety Lock” part of the timer’s user manual.


                                       
Cause: The time set for the oven alarm has elapsed.
Solution: Press any button.

This situation could be caused by your greasy oven. Just clean it and it would be fine. Another possible reason is the oven temperature is too high. You should reduce the temperature.

The oven fan is operating (even with the oven off) to cool down the surrounding’s temperature. Although this situation is normal, do contact our technicians for help if the problem wasn’t resolved for prolong period.

In order to solve your problem, you just need to push the accessories (grill and tray) further in to prevent it from coming into contact with the glass.

You must check the temperature selected against the temperature shown in the table by slightly increasing the temperature if baking is very pale or very wet while slightly reducing it if baking is very dark. When baking, always remember to select dark coloured enamelled baking moulds as they will absorb the heat better than light coloured moulds which prevents the baking turn out very pale.

You are recommended to check the electrical installation because the appliance is not receiving any power as the power supply or connection is faulty. However, if the problem arises isn’t caused by the possible reason stated, do contact our technician at 1-300-88-5188.

Because there has been an overflow or an object is obstructing the command panel. You need to clean or remove the object and start cooking again.

This situation is normal with some types of recipients due to the energy passing from the plate to the recipient. Just stay calm and ignore the sounds as there is no risk imposed on the plate or the recipient.

This means the connection to your hob plate is faulty. Check the fuses and trip switches to certify that your hob plate is appropriately connected.

Coffee is not hot
Cause : The cups have not been preheated.
Solution: Rinse the cup with hot water to heat them or leave them on the cup heating surface for at least 20 minutes.

Less coffee
Cause: Too many coffee beans or too much ground coffee has been added.
Solution: Select a milder strength or reduce the quantity of ground coffee and request a new coffee.

Fewer creamers
Cause: The coffee blend is not suitable.
Solution: Use a coffee blend for espresso coffee machines.

Five designs are obtainable in Fagor – Island hoods, Chimney hoods, Asian Chimney hoods, Classic hoods, and Canopy hoods. Other than the Island hoods, all others are wall-mounted.

Remove your filter and leave it soaked with solution of water and neutral liquid detergent. Then, rinse it with warm water and leave it to dry. You may wash it with dishwasher too. It is recommended to clean the filters at a maximum of two months period in order to prevent fire hazard.

The Chimney’s motor and light will automatically turned off after a fixed period of time. This keeps the energy consumption minimal.

Some of the concerns include:

	The design and availability of space allowances of your kitchen.
	Cooking style whether heavy or light.
	The size of your cooking hob (hood should be larger in size compared to hob). For instance, a cooking hob of 600mm requires 900mm of hood for a greater extraction capacity and efficacy.

Front loading washing machine twists and treats the clothes in more gentle movements with smaller holes designed in the drum. It would also reduce the consumption of water, electricity, and detergent compared to a front loading for an efficient washing. Thus, reducing monthly utility bills meantime, conserving the environment.

Both powder and liquid laundry detergents are suitable to be used provided that the detergents are labelled “Low Suds”.

With ABS, the clothing is evenly distributed inside the drum that minimizes and eliminates vibration and noise. Overtime, it adapts to the exact amount of clothing loaded.

Fagor washing machine lights your load and unload task with its size hatch up to 73cm from the floor with a diameter up to 34cm. Our aim is your comfort.

The easiest way is by not overloading your washing capacity. Overloaded the washing machine would cause huge damage on it as this will cause unnecessary wear and tear on the drum, deteriorating the components before their lifecycles.

Too damp condition: Damp situation occurs if the filter in the drum is clogged with fluff. So, constantly ensuring the condenser is not blocked by fluff and check whether the type of drying has been selected correctly. If selection is too low, switch to the next programme up or increase the drying time.

Too dry condition: This happens when the drying time selected is too long. Therefore, you have to shorten the drying time to avoid laundry becomes too dry and difficult to iron.

The types of textiles in the load are too different (e.g. sheets placed together with jeans), the laundry has been laid imperfectly unfolded in the dryer, and the drum is not overloaded.

The LCD processes and indicates washing and drying information such as washing programme, remaining time, delaying of time, safety clock and the information about functions or revolutions.

It is not recommended to place the items in the appliances straight away. Let the units run for at least 4 hours before placing in the foods and beverages.

A comparative study among different refrigerator brands available in the market had shown that Fagor refrigerators could cool substances up to 35% faster than the rest. For example, to cool down a 1.5 litter bottle of water from 25C to 5C, others need 555 minutes, while Fagor requires only 362 minutes. Thus, it has higher efficiency level.

Set the cooling appliances’ controls to a lower setting if the temperature is too low or setting it higher if the temperature is too high until the required and suitable temperature is reached. Make sure that you do not open the cooling appliances too often and close the door properly after each opened.

It is normal for refrigerators having loud noises as modern refrigerators increased in capacities to maintain more uniform temperature. However, the noises reduced as the refrigerator continue to operate.

Clean the interior of the cooling appliances with a sponge, warm water, and bicarbonate of soda. Ensure that the foods with strong aromas to be covered completely. Leaving an open container of baking soda or a pinch of charcoal in the coolers can help to absorb awful odours as well.

This happens due to:

	There is no power supply
	It isn’t plugged in correctly
	The power fuses have blown
	The dishwasher is not connected to the mains
	The dishwasher door is not closed properly
	You have not pressed the Start button

The reasons include:

	One of the utensils is preventing the dispenser from openingThe detergent had expired or not appropriate
	The detergent had expired or not appropriate
	The spray arms rub on a dish
	The spray arm nozzles are blocked
	The detergent container was damp when the detergent was added (the container must be dry)

This may be because:

	The wash filter is dirty, blocked, or not correctly in place
	The spray arm nozzles are dirty or the arms are blocked by a utensil
	The detergent is inappropriate or there is an insufficient amount
	The utensils are not correctly positioned (some utensils are in contact with others)
	There are too many utensils in the racks
	The wash programme is inappropriate
	The drain is blocked
	The food remains on the utensils were too old and dry

All Fagor dishwashers are equipped with the Aqua stop feature which operates as internal and external sensors to detect any leakage. Consequently, cuts the water supply automatically. Thus, it is safe.

To achieve these, try to fill up the capacity of your dishwashers with a standardized capacity of 12 place settings. This would also reduce water and electricity consumption, more economical and quieter operation. Bear in mind to select the correct wash programmes and additional functions as required and clean the dishwasher regularly. Likewise, if you are planning to be away for a long period, leave the dishwasher door open so that the air can circulate freely inside the machine to last longer without usage for extended period.